Iranian Classification Society Rules
Next >
2015
Introduction to the Classification Technical Rules
ICS
1. LIST OF CLASSIFICATION TECHNICAL RULES 1
3. CONTENTS OF CLASSIFICATION TECHNICAL RULES 7
4. CONVERSION TABLE OF SI UNITS 75
1. LIST OF CLASSIFICATION TECHNICAL RULES
2. USER'S GUIDE TO CLASSIFICATION TECHNICAL RULES
2.1 General
Rules, in principle, shall come into force after 3 months from the approved date and "Major Changes and Effective Date" is recorded at the beginning of each Rule for ready use.
"Rules for the Classification of Steel Ships" is composed of 12 parts and "Guidance Relating to the Rules for the Classification of Steel Ships" is composed of 10 parts.
(1) In principle, the text consists of Part, Chapter, Section, Article, Paragraph, Sub-paragraph, (A),
(3) The number of a figure or a table consists of part, chapter and serial
number in each chapter. table number is placed in
(1) In principle, the text consists of Chapter, Section, Article, Paragraph, Sub-paragraph, (A), (a) and (i).
2.4 Cross-Reference to Articles and Paragraphs
(1) Where a paragraph in any chapter is quoted from an other chapter in the same part, the chap- ter, relevant article and paragraph are written in sequence.
(2) Where a paragraph in any part is quoted from an other part, the part, chapter, relevant article and paragraph are written in sequence.
Where the contents of any rules are quoted in the rules other than 2.4.1, the names of the rules, part, chapter, relevant article and paragraph are written.
Ch 2, 202. of "Rules for the Classification of Steel Ships" is quoted in
2.5 Cross-Reference to Figures and Tables
(1) Where a figure or a table in any chapter is quoted from an other chapter in the same part, the number of the figure (or the table) is written.
(2) Where a figure or a table is quoted from an other part, the part and the number of the figure (or the table) are written.
Where a figure or a table of any rules is quoted in the rules other than 2.5.1, the name of the rules, the part and the number of the figure (or the table) are written.
2.6 Units
3. CONTENTS OF CLASSIFICATION TECHNICAL RULES
3.1 Contents of Rules for the Classification of Steel Ships
PART 1 CLASSIFICATION AND SURVEYS
PART 2 MATERIALS AND WELDING
PART 3 HULL STRUCTURES
PART 4 HULL EQUIPMENT
PART 5 MACHINERY INSTALLATIONS
PART 6 ELECTRICAL EQUIPMENT AND CONTROL SYSTEMS
PART 7 SHIPS OF SPECIAL SERVICE
PART 8 FIRE PROTECTION AND FIRE EXTINCTION
PART 10 HULL STRUCTURE AND EQUIPMENT OF SMALL STEEL SHIPS
PART 11 COMMON STRUCTURAL RULES FOR BULK CARRIERS
PART 12 COMMON STRUCTURAL RULES FOR DOUBLE HULL OIL TANKERS
PART 13 COMMON STRUCTURAL RULES TANKERS
3.2 Contents of Guidance Relating to the Rules for the Classification of Steel Ships
PART 1 CLASSIFICATION AND SURVEYS
PART 2 MATERIALS AND WELDING
PART 3 HULL STRUCTURES
PART 4 HULL EQUIPMENT
PART 5 MACHINERY INSTALLATIONS
PART 6 ELECTRICAL EQUIPMENT AND CONTROL SYSTEMS
PART 7 SHIPS OF SPECIAL SERVICE
PART 8 FIRE PROTECTION AND FIRE EXTINCTION
PART 9 ADDITIONAL INSTALLATIONS
PART 10 HULL STRUCTURE AND EQUIPMENT OF SMALL STEEL SHIPS
3.3 Contents of Rules for Offshore Structure
RULES FOR THE CLASSIFICATION OF MOBILE OFFSHORE UNITS
RULES FOR THE CLASSIFICATION OF FIXED OFFSHORE STRUCTURES
RULES FOR THE CLASSIFICATION OF MOBILE OFFSHORE DRILLING UNITS
3.4 Contents of Guidance for Offshore Structures
GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION
GUIDANCE FOR FLOATING LIQUEFIED GAS UNITS
3.5 Contents of Other Rules
RULES FOR THE CLASSIFICATION OF DREDGERS
RULES FOR THE CLASSIFICATION
OF UNDERWATER VEHICLES
RULES FOR THE CLASSIFICATION OF FRP SHIPS
RULES FOR THE CLASSIFICATION OF FLOATING DOCKS
RULES FOR THE CLASSIFICATION OF HIGH
SPEED AND LIGHT CRAFTS
RULES FOR THE CLASSIFICATION OF TOWING
3.6 Contents of Other Guidance
GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF STEEL BARGES
GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF UNDERWATER VEHICLES
GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF FRP SHIPS
GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF FLOATING DOCKS
GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF HIGH SPEED AND LIGHT CRAFTS
GUIDANCE FOR APPROVAL OF MANUFACTURING
GUIDANCE FOR FLOATING STRUCTURES
GUIDANCE FOR FREIGHT CONTAINERS
GUIDANCE FOR SINGLE POINT MOORING
GUIDANCE FOR RECREATIONAL CRAFTS
YACHTS
GUIDANCE FOR GAS-FUELLED SHIPS
GUIDANCE FOR FUEL CELL SYSTEMS ON BOARD OF SHIPS
GUIDANCE FOR SHIPS FOR NAVIGATION IN
4. CONVERSION TABLE OF SI UNITS
(1) Assignment of Load Line
(4) For vessels of 24 m in length and over, and for domestic voyage, the load line mark is to be as shown in Fig 3. However, for the vessels navigating solely on lakes and rivers sub-para- graph (5) may be applied.
ICS
Next >